Máy cường lực kính LD-AB AirStream LANDGLASS

Application Fields:

Architecture&Furniture, Automobile Industries and Household Appliances, etc.

Heating Mode:

Combination of radiation and assisstant convection heating.

Glass Can Be Tempered:

On-line Low-E Glass, Ultra Clear Glass, Screen Printed Glass, Pattern Glass, Tinted Glass, Clear Glass, etc.

Product Introduction

With the development of the glass industry, the B type bending and tempering furnace, which was originally made for tempering

small size glasses, was continuously redesigned to fit bigger glass sizes for the architectural glass market. After that, LandGlass

introduced the AB Flat & Bent Bi-Direction Glass Tempering Furnace. This type of machine is equipped with a flat and a bent quenching section at each side of the heating furnace. By loading glasses in different directions, the tempering line can either temper flat glass or bent glass.\

AirStreamTM Radiation Heating plays a supportive role during the process. Compressed air is injected into the heating furnace to aid the heating process of the top surface of the glass， which ensures heating uniformity for on-line Low-E glass, and other glass types.

LD-AB AirStreamTM Flat & Bent Bi-directional Glass Tempering Furnace adopts AirStreamTM Heating Technology. It is equipped with a flat and a bent quenching section at each side of the heating furnace. By loading glasses in different directions, the tempering line can either temper flat glass or bent glass. The glass that can be tempered includes: on-line Low-E glass, extra ultra clear glass, screen printed glass, pattern glass, tinted glass, clear glass, etc.

Technical Features

1. It is equipped with a flat and a bent quenching section at each side of the heating furnace. By loading glasses in different directions, the tempering line can either temper flat glass or bent glass.

2. Hard-shaft bending roller technology bends glass lengthwise.

3. The bending system consists of many bending mechanisms, each of which can camber by itself, and also can be slightly adjusted separately, therefore providing a higher accuracy curvature.

4. The bending system is controlled by German Servo Control System, which ensures good repeatability and consistency.

Technical Parameters

Productivity of bent glass is calculated on 5mm clear glass with 65% loadage. Actual productivity is subject to glass types, sizes and loadage. Not all types are listed here due to limited space.

Customer Case