RICCO GLASS selects a line with a full range of features and fully automates the steps from the robot to automatically feed – receive production order data through the wireless barcode reader and automatically change the parameters for grinding. 4-sided ball – washing and drying – robot automatically unloads glass.

The 4-sided low.e & solar control automatic polishing line with soft coating with HISENG barcode reader function is equipped with many outstanding features and unique only HISENG has:

# The outstanding advantages of smart technology on 4-edge automatic polishing line with barcode shooting function:

• Integrated bar code gun set with intelligent control software to ensure sequential receipt of production orders with multiple commands at the same time for automatic data adjustment of both machine and conveyor.

• When the glass is in machine 2 and the back plates of the same size are automatically transferred to continuous grinding.

• When the glass is in machine 2 but another size glass plate comes, the back plate will automatically stop right in front of machine 2 so that when machine 2 finishes grinding the plate, machine 2 will automatically adjust to change the speed width. speed and get the glass into the machine immediately.

• When the glass is in machine 2 but another size glass comes, the back panel will automatically stop right in front of machine 2 and the next sheet will not hit that sheet.

• If the glass is in machine 1 and the front plate has to be stopped by transmission, the plate in machine 1 will continue to grind out to the last sensor of machine 1 to stop completely automatically to maintain the optimum working speed. and do not collide the glass panels.

• Thus, it is possible to load glass continuously and load glass panels together without having to create large gaps between the panels to avoid glass collisions causing glass breakage like other conventional automatic lines ( Conventional lines do not have an intelligent self-stop mode, so if workers do not accurately calculate the distance, the glass will immediately collide, so to avoid this risk, the worker must create a very large distance between the panels. glass wastes too much in daily production).

• The machine has 3 mechanisms for inputting production instructions: (1) automatically by the barcode reader, (2) if the barcode reader or transmission line malfunctions, you can enter manually through the command door of the system. bar code, with these 2 data input methods, the machine performs the production instructions completely automatically as the above barcode command, while (3) input data through the manual command as automatic lines. Normally, the line will operate under the normal mechanism that the glass will not automatically stop when it is entangled with the front glass.

• The most obvious advantages of the data system controlled by the barcode reader: (i) The machine automatically selects the polishing or coarse grinding mode, (ii) Absolutely no mistake, (iii) saves time. time, (iv) a self-regulating system that continuously flows in and feeds the glass panels tightly together, without ever hitting each other at any point on both machines and conveyors for enhanced efficiency, optimization and science in production.

• While the glass is in the machine, it is impossible to adjust the access to the mobile platform, changing the width of the glass plate, making the transport line completely safe.

* (There are 2 types of reader: wired reader will read both bar code and QR code, wireless reader can only read bar code. The same fee)

### Besides, the traditional features of the chain are still inherent strengths:

• There are 2 types of readers: the wired reader can read both barcodes and QR codes, wireless readers can only read bar codes. Same fee)

• 3 PLCs

• 2 screens for common control for the whole line or for independent control of each machine.

• 40 ABB grinding heads.

• 6 servo motors + 6 drivers (machine is equipped with 4 servo motors for 8-conveyor movement and 2 ultra-fast speed-changing glass plate widths – 8 times faster than normal) .

• The machine is equipped with dual groove ballasts and HIWIN slide rails to ensure absolute stability, durability and precision.

• Water tanks, plumbing pipes, panels in contact with water are made of high quality, beautiful industrial stainless steel and ensure no rust to the water source.

***** The product is beautiful and sharp, evenly sharp on all 4 edges.