BLUETECH is striving to complete the first days of Spring, a specialized raw glass washing and drying machine for the production of mirrors and reflective glass, soft-coated low.e glass for DUC LINH GLASS factory.

BLUETECH is striving to complete the first days of Spring, a specialized raw glass washing and drying machine for the production of mirrors and reflective glass, soft-coated low.e glass for DUC LINH GLASS factory.

* Benteler technology washing machine – Italy

* Using inverter to automatically connect with the entire system of other equipment to form an automatic line.

* Control via liquid crystal display and PLC

* With a structure of 8 roll-type washing brushes and 2 combinations including nearly 50 disc-type washing brushes

* Can automatically link to change the thickness according to data from the double-edge grinding line with QR code or barcode shooting feature

* Has the feature of automatically closing the air vent and automatically turning off the high-pressure fan to reduce noise and save energy.

* The main structure of the upper and lower body pillow frame is made of a completely new generation of cast aluminum core system (no need to drill, or weld, causing the frame system to weaken and rust the water source).

* The entire movement is by gears (not by chains, so it does not cause water pollution due to grease splashing)

* The machine is designed to wash soft-coated Low.E glass with specialized brush rolls No. 3 and 4 and automatically lifts 2 rough brush rolls No. 1 and No. 2 with a combination of nearly 50 disc brushes when washing soft-coated Low.E glass and solor control

* Has a structure that lifts the entire upper body up to 400mm for easy repair and maintenance

* Has a function of heating water and hot air adjusted through the liquid crystal screen, super fast washing, super clean and super dry

* The high-strength steel frame of the machine is folded to create rigidity, resistance and durable stability

* 2 disc brush combinations are placed on a separate frame from the machine body to prevent vibration for the machine

* ​​There is a design of a water spray pipe box on the top and a submerged water pipe on the bottom so that all glass panels are exposed to water as soon as the glass enters the machine and before washing by 2 disc brush combinations.

* Designed with 1 high-pressure wind knife box to prevent water from overflowing

* Designed with 1 preliminary cleaning water spray pipe box and 1 high-pressure wind knife box for preliminary cleaning before the glass is transferred to the main washing chamber

* Designed with an additional high-pressure wind knife box for preliminary cleaning after running through the first 2 pairs of main cleaning brushes before the glass is transferred to the final main washing chamber

* The machine is designed with 3 pairs of wind knives to dry the glass, so the glass will be dried super fast, helping the machine’s operating speed to be super fast and ensuring that the glass is absolutely clean and absolutely dry immediately after washing, ensuring strict technical requirements for raw glass before being put into the vacuum plating chamber for the production of mirrors, low.e glass, and reflective glass.

* All parts in contact with water are made of stainless steel, and all components of the machine are of high quality, helping the machine to operate at a fast, stable and durable speed.